Anchoring Clamp
NES-B4 Anchoring Clamp
NES-B4 Anchoring Clamp for overhead conductor anchoring. Confirm cable arrangement and conductor cross-section and request model-specific information from GRL.
Project-focused selection
Support matched to operating conditions and project requirements.
Quality-controlled supply
Clear communication from confirmation through delivery.
Export service
Documentation and shipping support for overseas buyers.
NES-B4 Anchoring Clamp overview
The NES-B4 Anchoring Clamp is listed in the GRL range for overhead conductor anchoring. Use the model-specific information below to compare cable arrangement and conductor cross-section, messenger or self-supporting cable construction and anchoring load and mounting hardware before selecting a configuration.
This clamp is designed to anchor the low voltage fully supportedA.B.C.(Aerial Bundled Conductors).
Description
– The arms are made of hot-dip galvanised steel. A bolt enables the clamp to be easily dismantled manually and anchored on a bracket fixed to a pole or façade.
– The cleats are made of UV resistant, glass fibre reinforced synthetic material.
– The conductors are attached using a combination of bolts and cleats. Two 17mm shear head nuts are used to control the tightening torque.
– Each conductor runs through a separate channel. The conductors are anchored by distributing the loads, protecting the insulation.
– A large opening facilitates the passage of the conductors between the clamp arms.
Implementation
– Unscrew the nuts.
– Open the A.B.C and insert each conductor into one of the channels.
– Screw the nuts alternately using a 17mm spanner until the shear head breaks. The 21mm head is only provided for possible dismantling.
– Anchor the clamp on a hook.
– Additional tightening is achieved automatically by the cleats.
Material: Mild Steel ,Nylon plus fiber glass
Product property : It is used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor .
| Modle | Conductor Cross-Section(mm2) |
| NES-B1 | 4X(16-35) |
| NES-B2 | 4X(50-120) |
| NES-B3 | 4X(25-120) |
| NES-B4 | 4X(95-150) |
Selecting NES-B4 Anchoring Clamp
Before requesting a quotation, confirm cable arrangement and conductor cross-section, messenger or self-supporting cable construction and anchoring load and mounting hardware. Send the exact model, quantity and installation details so the configuration and document set can be checked against your project.
Compare the anchoring clamp range, including NES-B3 Anchoring Clamp; SM116 Anchoring Clamp. For drawings and order-specific questions, send your product requirements to GRL.
Related Products
Explore more products from the same category.
Project inquiry
Tell Us What Your Project Needs
Include the voltage level, quantity, application and destination market for a faster response.