STD Anchoring Clamp

<p><strong>Description of self supporting anchor clamp:<br/></strong></p><p>The self supporting anchor clamp for ab cable service line.The dead end clamp is designed to anchor insulated service lines with 1,2 or 4 conductors to the pole or wall. The clamp is composed of a body, wedges and removable and adjustable bail or pad. One core adjustable anchor clamp are design to supporting the neutral messenger,the wedge can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Standard: NFC 33-042.<br/></p><p><strong>Materials:</strong></p><ul class=" list-paddingleft-2"><li><p>Body and Wedges: UV resistant, high strength engineering-plastic.</p></li><li><p>Bail: Hot-dip galvanized or Stainless Steel.</p></li></ul><p><strong>Features &amp; Benefits:</strong></p><ul class=" list-paddingleft-2"><li><p>Exceeds requirements of NF C 33-042 and other international standards.</p></li><li><p>Withstands extreme conditions leading to long life, safety, low maintenance and reduced lifetime cost.</p></li><li><p>Engineering plastics provide additional insulation, strength and enable live line working.</p></li><li><p>Easy installation without tools.</p></li><li><p>Two clamps with a bracket used for large angle assembly which allows for easy turning in congested areas.</p></li><li><p>Captive Design Clamp with a bracket used for straining, reduces installation time and cost.</p></li></ul><p><strong>Feature of adjustable tension clamp:</strong></p><p>1.Simple and fast installation requiring no tools.</p><p>2.Suits to all field configurations.</p><p>3.Possible to mount on pole line hardware with open or closed eye.</p><p>4.Mechanical traction resistant.</p><p>5.Supports industrial duty tension.</p><p>6.Corrosion resistant.<br/></p><p><strong>For the correct installing cable dead end clamp, the following steps are recommended:</strong></p><p>Loosen the mooring hook from the anchor clamp.</p><p>Place the hook en the place to be mooring point or support, fixing it inside the body of the clamp</p><p>Remove the wedge from its base and then place the cable within the clamp.</p><p>Replace the wedge to its corresponding position and proceed to tense the cable taut.<br/></p><table><tbody><tr><td>Modle</td><td>Cross-section（mm²）</td></tr><tr><td>STA</td><td>1X10/1X16</td></tr><tr><td>STB</td><td>2X16/2X25</td></tr><tr><td>STC</td><td>4X16/4X25</td></tr><tr><td>STD</td><td>1X16/X/70</td></tr><tr><td>LA1</td><td>4X16/4X25</td></tr><tr><td>LA2</td><td>2X6/2X16</td></tr><tr><td>DCR-1</td><td>1X4/1X25</td></tr><tr><td>DCR-2</td><td>1X4/1X25</td></tr><tr><td>2.1</td><td>16-25</td></tr><tr><td>2.3</td><td>16-35</td></tr><tr><td>PA1500</td><td>25-30</td></tr></tbody></table><p><img src="/static/upload/image/20260930/std-anchoring-clamp-detail.jpg"/></p>